How to Install Android 2.3.3 on Nexus S

Nexus S Android 2.3.3 (GRI40) manual update is also here for those who are impatiently waiting to get their hands on the latest Gingerbread update.

I have done a full tutorial on how you can update your Nexus S to the latest software update manually. See after the jump!

How to Install Nexus S (GRI40) Software Update

Here’s a detailed tutorial on how to install the Android 2.3.3 (GRI40) update on your rooted Nexus S. I have previously done a similar tutorial on how to install Android 2.1 (Update 1) manually on Nexus One, and I will be following the same steps in this case too.

Disclaimer: Try this on your own risk. I’m not responsible if you mess up with your Nexus S.

1. Download Gingerbread GRI40 the Nexus S Android 2.3.3 software update (GRI40) on your PC.

2. Rename the downloaded .zip file to ‘‘.

3. Connect and mount your Nexus S USB memory on your computer using the USB cable.

4. Now copy/paste the file to your USB memory. Make sure the file is in the USB memory root. It should not be in a directory.

5. Then turn off your phone.

6. Now to get in the bootloader mode, turn on the phone while pressing and holding the volume up and power buttons.

7. Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

8. Assuming you have ClockworkMod recovery, scroll down to “Flash zip from SD card” and press the power button to open it.

9. Using volume keys, select your “” file. Confirm the installation and the installation procedure should start now.

10. After the installation completes, reboot the phone by selecting “Reboot system” from the recovery menu. It might look as if stuck again on the Android bot, but it will soon reboot.

That’s it! Your Nexus S should have the latest software update installed on your phone! Go to Settings >About phone to verify.

Was this post helpful? Follow us on Twitter (@SizzledCore) or become our Facebook fan for all the latest updates!

Comments are closed.